INSTALLATION OF SKY-FRAME TOUCH

Materials required for start-up with PC (parameter setting)

• PC/laptop with latest Windows operating system
• Service adapter (IXXAT / USB to CAN adapter) Art. No. 400445
• Ethernet cable (L = 5m) Art. No. 40044
• Mains lead test cable (L = 5m) Art. No. 213200
• Sky-Impulse service software V1.0.6.0
• SI-1000 firmware 0.1.13.A

Batteries for Touch control button

• Button cell battery CR1632

Tools

• Cordless electric drill
• Drill 3.3mm
• Cutter knife
• Pointed pliers
• Slotted screwdriver size 0
• Hexagon screwdriver size 3mm
• Torx screwdriver size 20
• 2x putty knife
• Rubber mallet
• Screw locking compound e.g. Loctite No. 243

Optional for start-up

• Electrician/in-house automation specialist

Contact Sky-Frame Tech Support
tech.support@sky-frame.ch
+41 52 724 95 13

Installation receiver

Installation control button

activate Inching mode SI-1000 

Battery replace insert

Pairing Transmitter Receiver 

Invert Open Close 

Button-lock enable disable

Replace Transmitter Board Storage